| Diagram # | Part # | Description | Price | Add to Cart |
| 1 | | Torque Item # 1 used on Heavy Duty Gear Boxes to 125 in?lb (14.4 N -m). DO NOT apply Loctite?. | |
|
| 2 | | Apply Loctite? Threadlocker # 277 (Red) to Item # 2 used on Heavy Duty Gearbox Connector Tubes. Torque to 300 in-lb (34.7 N -m). | |
|
| 3 | | Apply Loctite? Threadlocker # 242 (Blue) to P/N F211 (1/4-20x7/8 Hex Bolt, used on Gearbox Connector Tubes) prior to assembly. Torque to 90 in-lb (10.2 N m). | |
|
| 4 | | Torque P/N F018 (5/8-18 Hex Nut, used on underside of blades) to 60 ft-lb (81.4 N -m). DO NOT apply Loctite?. | |
|
| 5 | | Apply Loctite? Threadlocker # 242 (Blue) to P/N F114 (5/16-18 x 5/8 SQH Set Screw, used on Drive Pulley) prior to assembly. Torque to 190 in-lb (21.5 N m). | |
|
| 6 | | Apply Loctite? Threadlocker # 242 (Blue) to P/N F076 (3/8-16 x 5/8 SQH Set Screw, used on U-Joint Shaft Assy, T-Scope) prior to assembly. Torque to 400 in-lb (45.2 N m). | |
|
| 7 | | Torque P/N F339 (5/16-18 x 3/4 Self-Tapping Bolt, used on Mount Braket & PTO Guard) to 200 in-lb (22.6 N m). DO NOT apply Loctite?. | |
|
| 8 | | Apply Loctite? Threadlocker # 242 (Blue) to P/N F226 (5/16-18 x 7/8 Hex Bolt, used on Right Angle Gearbox) prior to assembly. Torque to 18 ft-lb (24.4 N m). | |
|
